Morse Code Translator - Text to Morse and Back, with Sound
Morse code translator
For Morse, type dots (.) and dashes (-), one space between letters and a slash (/) between words.
Morse code table
Letters
Accented letters (national extensions)
Numbers
Punctuation
Russian (Cyrillic) letters
How to use the Morse code translator
Type a message and get it in international Morse code, or paste dots and dashes and read them as text. Letters are separated by a space and words by a slash, the same notation radio operators use when they write Morse down.
Three steps
- 1 Type or paste text or Morse code. The tool detects which one it is; you can also fix the direction by hand.
- 2 Read the result. É, Ä, Ö, Ü, Ç, Ğ and Ş get their own codes; other accented letters are sent as plain ones and listed below; anything without a Morse code is shown as #.
- 3 Press Play to hear it. Set the speed in words per minute and pick a tone between 600 and 700 Hz.
How Morse timing works
Everything is measured in one unit, the length of a dot. A dash is 3 units, the gap inside a letter 1 unit, the gap between letters 3 units and the gap between words 7 units. Speed is defined by the word PARIS, which takes exactly 50 units, so one unit lasts 1200 ÷ WPM milliseconds: 60 ms at 20 WPM. That is why “E” (a single dot) is so much shorter than “0” (five dashes).
Accented letters and other alphabets
The international table (ITU-R M.1677-1) covers A–Z, 0–9, common punctuation and a single accented letter, É (..-..). The tool also uses the common national extensions: German Ä (.-.-), Ö (---.), Ü (..--) and CH (----), Turkish Ç (-.-..), Ğ (--.-.) and Ş (.--..), Spanish Ñ (--.--), Scandinavian Å (.--.-) and Polish Ł (.-..-); Turkish Ö and Ü share the German codes, and both I and İ are sent as two dots (..). Other accented letters such as è, à or ã are sent as E and A, and the tool lists every substitution so you know what the receiver will read. Russian has its own table that reuses most Latin codes, so the same signal can mean two letters: --.- is Q in the Latin table and Щ in the Russian one. Choose the alphabet before decoding.
SOS is one signal, not three letters
Written letter by letter, SOS is ... --- ..., but in an emergency it is keyed as one unbroken sequence, ...---..., with no gaps between the letters. It was chosen because the pattern is easy to recognise, not because it stands for “save our souls”. The translator decodes both forms.
The most common mistake: missing spaces
Morse only works with the gaps. “....” is H, while “. . . .” is EEEE, and “.-” (A) without its space next to “-” becomes “.--” (W). If a decoded message looks like nonsense, check the spaces first. Long dashes (— or −) and middle dots (·) copied from other texts are converted automatically.