Double Click Test - Check Your Mouse for Double-Click Faults
Double Click Test
Click each button in this area at a normal pace, single clicks only. If one press is registered as two clicks, it shows up in the table and the evidence list.
In this area the context menu, middle-button scrolling and back/forward navigation are turned off. Spin the scroll wheel here too.
No clicks yet. Start clicking in the area above.
Buttons
Double clicks: two presses of the same button closer than the threshold. Drops: the button was released and pressed again within the threshold after being held. Shortest: the smallest gap between two presses.
Scroll wheel
Spin the wheel over the test area in one direction.
A reverse step is a step in the opposite direction less than 100 ms after the previous one. If they appear while you scroll one way, the wheel encoder may be dirty or worn. Touchpads and free-spinning wheels send many small steps.
Evidence list
No suspicious events yet. Each one is listed here with its time and gap.
To try all buttons, the scroll wheel and the polling rate together, use the general mouse test.
Why a mouse double-clicks on its own
Each mouse button sits on a small mechanical switch. When its contacts wear or oxidise, one press can briefly open and close the circuit twice. The mouse then reports two clicks: a file opens instead of being selected, or a dragged item falls. This test catches such double clicks with millisecond timing and lists each one as evidence.
How to test your mouse
- 1 Start with the fault scan. Click each button in the test area 50 to 100 times, one click at a time, at your normal pace.
- 2 Switch to hold and drag: hold the left button for 3 seconds while moving the mouse, five times. Spin the scroll wheel in one direction over the area.
- 3 Read the evidence list. A single event can be an accident; the same fault coming back on the same button points to the switch. Repeat on another day or another computer to be sure.
How the test decides what is a fault
When you click one at a time, two presses of the same button rarely come closer than about a tenth of a second. A chattering switch produces its second click within a few milliseconds. The test therefore marks two presses closer than the threshold (80 ms by default, adjustable from 40 to 120 ms) as a double click. A drop is a release followed by a new press within the threshold while you were holding the button. The scroll wheel counts a step in the opposite direction less than 100 ms after the previous one as a reverse step.
Double-click speed and the system setting
An operating system treats two clicks as a double-click only if the second comes within a set time. In Windows the default is 500 ms and it can be changed in the mouse settings (double-click speed); macOS has a similar slider. The speed mode measures your own double-clicks from the first press to the second. If yours are close to the limit, a slower setting helps; if double-clicks happen when you meant to click once, the setting is not the cause, because it never creates extra clicks.
Is it the mouse or the computer?
Faults that stay on one button and follow the mouse to another computer or USB port come from the mouse itself. If the problem appears with every mouse, look at software: macro or remapping tools, accessibility options such as ClickLock, or a remote-desktop program. Wireless mice can also misbehave with a weak battery or a receiver far from the mouse. Some gaming mice let you raise the switch debounce time in their own software, which can hide mild chatter.
How this differs from the mouse test
The general mouse test shows at a glance whether every button, the wheel and movement respond, and counts quick double presses as a side note. This page is for diagnosing a suspected faulty switch: three separate tests for single clicks, deliberate double-clicks and holding, a timed evidence list for every suspicious event, a per-button table with releases and drops, and a history so you can compare sessions over days.
To try all buttons, the scroll wheel and the polling rate together, use the general mouse test.