Contrast Sensitivity Test - Online Low Contrast Vision Check
Contrast Sensitivity Test
A gray ring with a gap appears on a gray background. Say which way the gap points. The ring gets fainter when you are right and stronger when you miss.
Example result: log CS 1.71 · lowest contrast seen 1.96%
Get ready: set the brightness and sit at the distance described below.
Background gray level 230 of 255; the ring is 1 to 61 levels darker (Weber contrast from 50% down to 0.98%). Two correct answers in a row make it fainter, one miss or “Can’t see” makes it stronger. The test stops after 8 changes of direction, usually within 20–40 answers; the result is the average of the last 6.
Before you start
- Set the screen to a bright, comfortable level and turn off night mode, blue light filters and automatic brightness. Avoid glare and reflections on the screen.
- Sit about 1 metre from a computer screen, or hold a phone at arm’s length. Use the glasses or contact lenses you normally wear, and keep the room normally lit.
- This screen test is not a medical diagnosis and does not replace an eye exam. Results depend on your screen and the room.
What contrast sensitivity is and how this test measures it
Contrast sensitivity is how faint a shape can be before you stop seeing it against its background. Standard eye charts use black letters on white, so they test sharpness at full contrast; everyday life is full of low contrast: fog, dusk, night driving, gray steps, a face in shadow. You can read the smallest line on a chart and still need more contrast than average.
How to take the test
- 1 Turn up the brightness, switch off night mode, wear your usual glasses and sit about 1 metre from the screen (a phone at arm’s length).
- 2 For each ring, press the arrow that matches the gap (or use the arrow keys). If you see nothing, guess or press “Can’t see”. Do not lean in closer as the ring fades.
- 3 After 8 changes of direction the test ends and shows your threshold as Weber contrast and as log CS, together with the gray levels used.
Weber contrast and log CS
Weber contrast compares the luminance of the symbol with that of the background: (background − symbol) / background. A ring at 2% is only 2% darker than the gray around it. Contrast sensitivity is the inverse of the threshold and is usually written as a base-10 logarithm, log CS = −log10(threshold): a threshold of 10% gives log CS 1.0, 1% gives 2.0. Higher log CS means you see fainter shapes.
The Pelli-Robson chart
The best-known clinical chart for this was described in 1988 by Denis Pelli, John Robson and Arnold Wilkins. It shows large letters in groups of three, and each group is 0.15 log units fainter than the one before, from full contrast down to log CS 2.25. It is usually read from about 1 metre in standard lighting. Chart guidance often describes a score around 2.0 as normal and lower scores as reduced, but those figures belong to the printed chart under its own conditions and do not transfer directly to a screen test like this one.
How this screen version works
Instead of letters, the test uses a ring with a gap (a Landolt C) in four directions, so no reading or language is involved. The ring is drawn pixel by pixel with exactly two gray values, background 230 and the ring 1 to 61 levels darker, with no smoothing or dithering. Contrast is calculated from the sRGB brightness curve. A 2-down/1-up staircase adjusts the contrast after every answer and settles near the level you get right about 71% of the time. On an 8-bit screen the faintest possible ring is one gray level apart, about 0.98% (log CS 2.01), so very sensitive eyes reach the screen’s limit rather than their own.
Limits of a screen test
Your screen’s brightness curve, panel type, viewing angle, reflections and room light all shift the real contrast, and the test cannot measure them. That is why the result is best used to compare yourself on the same device over time. It is not a medical diagnosis and does not replace an eye exam. Reduced contrast sensitivity can have many causes, from tiredness and dry eyes to conditions that need treatment, so if your vision has changed, see an eye care professional.