Refresh Rate Test - Check Your Monitor Hz Online
Refresh rate test
Your browser draws a new frame each time the screen refreshes. The test times those frames for a few seconds and shows how many times per second your screen is actually updating in this window.
The measurement starts on its own. Keep this tab in front and wait a few seconds.
Motion test
The same saucer moves at the same speed in all three lanes, redrawn every frame, every 2nd frame and every 4th frame. The faster your screen, the smoother the top lane looks. A smeared trail behind it comes from the panel’s pixel response time (ghosting). The number at the top right counts frames.
Frame times
Each bar is the time between two frames; the line is the median. Red bars are dropped frames, when the browser missed a refresh.
What can change the result
- Battery saver and power-saving modes can cap how often the browser draws, and a tab in the background is slowed down or paused completely.
- With variable refresh (VRR, adaptive refresh on phones and laptops), the screen follows the content, so the rate can change from one measurement to the next.
- With several monitors, the test measures the screen this browser window is on. Move the window and measure again to check another screen.
- At 60 Hz one frame lasts about 16.7 ms, at 144 Hz about 6.9 ms. That wait is part of every reaction you measure on screen: Reaction Time Test
How to check your screen’s refresh rate
The refresh rate, in hertz (Hz), is how many times per second a screen draws a new image. Office monitors and most laptops run at 60 Hz, gaming monitors at 120, 144, 165, 240 Hz or more, and many recent phones at 90 or 120 Hz. A higher rate makes scrolling and moving objects look smoother and shortens the delay before a change appears on screen.
How the test works
- 1 Open the page and keep the tab in front. The measurement starts by itself and takes about three seconds.
- 2 The page records the time of every frame the browser draws, discards outliers and turns the typical frame time into hertz.
- 3 Compare the result with what your monitor should do, and use the motion test to see the difference with your own eyes.
Why your 144 Hz monitor may show 60 Hz
Many high refresh rate monitors run at 60 Hz until you choose a higher rate in the operating system’s display settings. The cable and the port also have to support it: an older HDMI cable or port may cap the rate at the full resolution. If the result is lower than expected, check the display settings first, then the cable and the graphics driver.
Frame time, jitter and dropped frames
Frame time is the inverse of the refresh rate: 1000 divided by the hertz value gives the milliseconds per frame. Jitter shows how much single frames differ from that average; on a steady system it stays well below one millisecond. Dropped frames are moments when the browser was too busy and skipped a refresh. A few during page loading are normal; many of them point to a busy computer rather than a slow screen.
Refresh rate, ghosting and response time
The refresh rate decides how often a new image arrives; the response time decides how quickly the pixels change to it. If the pixels are slow, a moving object leaves a faint trail even on a fast screen. In the motion test, a sharp saucer with a short trail in the top lane means both are good. If the top lane looks no smoother than the second one, the screen is probably not running at the rate you expect.
How accurate is a browser measurement?
Browsers time their drawing to the screen’s refresh, so on a calm system the raw value usually lands within a fraction of a hertz of the real rate, for example 59.94 or 143.9 Hz. That is why the test also rounds to the nearest common rate. What it measures is the rate the browser actually gets, which is what matters for games and video in the browser; the panel itself may support more if the system or browser is limiting it.