Mic Test - Check Your Microphone Online with a Live Level Meter
Microphone Test
Check that your microphone works and how loud it is: live level in dBFS, waveform and frequency spectrum, the device and sample rate the browser actually uses, and an optional 5-second recording to hear yourself.
Private by design: the sound is analysed only in your browser. Nothing is recorded to a server, uploaded or saved. The optional 5-second recording stays in this tab’s memory and is deleted when you record again, delete it or leave the page.
Press "Start microphone" and allow access when the browser asks.
How the microphone test works
The page asks the browser for your microphone and analyses the signal locally about 60 times per second. You see the same signal a video-call or recording app would receive, before any app adds its own processing.
How to test your microphone
- 1 Press "Start microphone" and allow access. If you have several microphones, pick the one you want in the list; the names appear after you allow access.
- 2 Speak at your usual distance and volume. Watch the level bar and the status line: it tells you whether the signal is missing, too quiet, clipping or fine.
- 3 Optionally record 5 seconds and listen back. Try it with echo cancellation, noise suppression and automatic gain on and off to hear what your call app does to your voice.
Reading the level: what dBFS means
dBFS means decibels relative to full scale. 0 dBFS is the loudest value a digital signal can hold, so every level is negative. Each 6 dB is roughly a doubling of amplitude. RMS reflects how loud the sound is on average, the peak shows the highest point. If peaks reach 0 dBFS the waveform is cut flat (clipping) and the sound distorts; no app can repair that afterwards. A signal that is too quiet is less harmful, but raising it later also raises the background noise.
Echo cancellation, noise suppression and automatic gain
Browsers can process the microphone before any page receives it, and call apps usually request all three. Echo cancellation removes the sound of your own speakers that the microphone picks up again, so the other person does not hear themselves. Noise suppression filters steady background noise such as fans or hum, and can make voices sound slightly thin. Automatic gain control keeps raising or lowering the volume, so the meter looks fine even when the microphone itself is set too low or too high. That is why this test starts with all three off.
Microphone not working? Common causes
Most problems are settings, not broken hardware. The browser may have blocked the site, or the operating system may block all browsers from the microphone in its privacy settings. A different input may be selected, for example a webcam microphone instead of your headset. Headsets often have a mute switch on the cable or ear cup. On Windows, another program can hold the microphone exclusively. Bluetooth headsets switch to a low-quality call mode while their microphone is in use, so music on the same headset may suddenly sound muffled.
Privacy: what happens to your audio
The analysis runs entirely in your browser; the page sends no audio anywhere and keeps no history. The 5-second recording exists only as a temporary object in this tab’s memory and is released when you record again, delete it or leave the page. Pressing Stop closes the microphone completely: the browser’s red recording indicator should go out. If it stays on, another tab or app is still using the microphone.