Dead Pixel Test - Check Your Screen for Stuck Pixels
Dead pixel test
The test fills your whole screen with one color or pattern at a time. Look closely for dots that do not match: a black dot on a bright color is usually a dead pixel, a colored or white dot on black is a stuck pixel.
Before you start
- Wipe the screen with a soft, dry microfiber cloth. Dust and specks look just like dead pixels.
- Turn brightness up for the color screens. For the light bleed check, dim the room lights.
- Scan the screen from a normal distance first, then up close. A phone camera zoom helps with tiny dots.
- Found a dot? Take a photo with that pattern on screen and note where it is. It helps with a return or warranty claim.
How to check a screen for dead pixels
A screen is made of millions of pixels, each built from red, green and blue subpixels. A single faulty one is easy to miss in everyday use but jumps out on a plain color. That is why the best time to test is right after buying a monitor, laptop, phone or TV, while you can still return it.
How to use the test
- 1 Clean the screen, set brightness high and press "Start full-screen test".
- 2 Go through the colors with a click, a tap or the Space key, and look over every part of the screen, including the edges.
- 3 Press Esc or Exit to leave. If you spot something, repeat that pattern and photograph it.
Dead pixel or stuck pixel?
A dead pixel no longer lights up at all, so it shows as a black dot that is easiest to see on white and bright colors. A stuck pixel is the opposite: one or more of its subpixels stays on, so you see a red, green, blue or white dot that is most visible on black. Stuck pixels sometimes recover on their own, while dead pixels usually stay. A dot that moves or disappears after cleaning was dust, not a pixel.
Light bleed, uneven backlight and banding
LCD screens use a backlight, and some of that light can leak around the edges. On a black image in a dark room it shows as brighter patches, usually near the corners. A little is normal for many panels; strong, distracting patches are worth reporting. A glow that shifts when you move your head is typical of IPS panels and differs from bleed. OLED screens have no backlight, so they do not bleed. The gradient pattern shows banding: visible steps instead of a smooth transition.
How many dead pixels are allowed?
There is no single rule. Many manufacturers base their policy on the ISO 9241-307 standard, which sorts screens into pixel fault classes from I (strictest) to IV and distinguishes always-lit pixels, always-dark pixels and faulty subpixels. The class says how many of each type may appear per million pixels. Which class a product meets, and how many faults a warranty accepts, is up to the manufacturer, so read the exact policy for your model. Shop return periods are often more generous than the warranty.
What to do if you find one
First rule out dust by cleaning and testing again. If the dot stays in the same place, photograph it on the pattern where it is most visible and contact the shop or manufacturer while you are still within the return or warranty period. Do not press hard on the panel or use sharp objects: an LCD or OLED screen can be damaged permanently that way. A single stuck pixel near the edge may not bother you in daily use, but a dead pixel in the middle of the screen is worth reporting early.