Touchscreen Test - Check Multi-Touch and Dead Zones Online
Touchscreen test
Each finger gets its own color and number and leaves a trail. Made for phones and tablets; on a computer you can try it by dragging with the mouse.
How to test a touchscreen
This page checks the two things that most often go wrong with a touchscreen: multi-touch (how many fingers are detected at the same time) and dead zones (spots that ignore touch). Everything runs in your browser; nothing is recorded or sent.
How to use it
- 1 Open Multi-touch and put your fingers on the area one by one. The highest number reached stays visible as “Max at once”.
- 2 Switch to Dead zone scan, tap Full screen and swipe across the whole screen, row by row, until every cell is filled.
- 3 Tap Show empty cells. Striped cells never registered a touch; go over them again slowly before drawing conclusions.
How many touch points should a screen detect?
Most current phones and tablets detect several fingers at once, and many report 5 or 10 touch points to the browser. If a second finger already makes a ring disappear, the touch panel or its driver is the likely cause. Some devices also ignore touches right at the edge on purpose (palm rejection), so start your fingers a little away from the frame.
What causes dead zones?
Typical causes are a cracked or damaged touch layer, wear after years of use, a thick or badly applied screen protector, moisture on the glass, or a loose display connector after a repair. A real dead zone usually shows up as the same block of cells staying empty every time you scan.
Ghost touches and a jumpy trail
If rings appear without anyone touching the screen, or the trail jumps around, the screen is picking up false touches. Common triggers are a low-quality charger (electrical noise), water drops and a dirty screen. Unplug the charger, clean and dry the glass, then test again.
Laptops and monitors with a touchscreen
Touchscreen laptops and monitors can be tested the same way: use full screen and your fingers. A mouse lets you try the page, but it is a single pointer, so it says nothing about the touch panel itself.