Reaction Time Test - Measure Your Reflexes in Milliseconds
Reaction time test
Time runs from the screen frame in which the box turns green to the moment you press (button down, touch or key down). The delays of your screen, mouse and browser are included, so compare results on the same device.
About the reaction time test
This test measures simple visual reaction time: how long it takes from the moment a signal appears on screen until your finger presses. It is the same idea as the start of a sprint, only with light instead of a starter pistol. One try tells you little, so the test takes the average of five.
How to take the test
- 1 Click the blue box (or press Space). It turns red: keep your finger ready and watch.
- 2 After a random wait of 1.5 to 5 seconds the box turns green. Press immediately. Pressing on red means “too early” and that try is repeated.
- 3 After five tries you get your average, best and worst time. The average is the number worth comparing; it is saved in your history.
What is a normal reaction time?
For a simple visual signal, most adults react in roughly 200 to 250 milliseconds under laboratory conditions. On an ordinary computer the equipment adds its own delay, so averages of about 200 to 300 ms are typical in a test like this one. Results vary from day to day with sleep, alertness and warm-up, and reaction time slowly gets longer with age.
Your screen is part of the measurement
A screen does not change instantly: it draws a new image at its refresh rate. At 60 Hz a frame lasts about 16.7 ms, at 144 Hz about 6.9 ms. The green colour can only appear with the next frame, and the panel itself needs a few more milliseconds to show it; TVs outside game mode can add much more. The test starts the clock in the frame in which green is drawn, but the time until it is actually visible on your display still ends up in your result.
Mouse, keyboard, touch and browser delay
Input devices report presses at fixed intervals: a common USB mouse polls 125 times per second (up to 8 ms), gaming mice up to 1000 times (about 1 ms). Wireless and especially Bluetooth connections can add a few milliseconds or more, and touchscreens usually react later than a mouse. The browser and operating system also need a moment to deliver the event. This test counts the moment you press down, not when you release, but all of these delays are inside the number you see.
How to get a better result
Use a wired mouse or keyboard, a high refresh rate if your screen has one, and turn on game mode on a TV. Rest your finger on the button so that only a short press is needed. A few warm-up tries help, and so does a good night’s sleep; tiredness, distraction and alcohol make reactions clearly slower. Do not try to guess the moment: the wait is random, and anticipation only produces “too early” results.