Hearing Test - Online Hearing Range and Frequency Test
Hearing Range Test
Find the highest pitch you can hear, for each ear separately, with short pure tones. It shows your hearing range on this device; it is not a hearing test by an audiologist and not a medical diagnosis.
Start with a low volume and raise it slowly. Headphones are recommended, wired if possible. Never turn high tones up to a loud level, and stop if any sound is uncomfortable.
Set your device volume so this tone is clearly audible but quiet, then do not change it during the test.
This test is not a medical diagnosis and does not replace a hearing test with calibrated equipment. If you notice hearing loss, ringing in the ears or sudden changes, see an ENT doctor or audiologist; sudden hearing loss needs prompt care.
About this hearing range test
Young people with healthy hearing can usually hear from about 20 Hz up to around 20 kHz. This test plays pure tones in your browser and finds your upper limit on your current device – the part of the range that usually shrinks first with age.
How to take the test
- 1 Put on headphones, keep the page volume low and adjust your device volume with the 1 kHz reference tone.
- 2 Listen to each tone and answer “I hear it” or “I don’t hear it”. The tones get higher until you stop hearing them.
- 3 Read the highest tone for each ear and compare it with the rough age guide.
How does the test work?
Each tone is a pure sine wave of about 1.2 seconds, generated in your browser and faded in and out so it does not click. The high-tone part starts at 8 kHz and rises in steps of 1 to 2 kHz; at the first tone you miss, it checks once halfway between the last tone you heard and the missed one. Left and right ears are tested separately with stereo panning. One silent check is mixed in: if you say you heard it, the result is marked as possibly unreliable. The frequency is not shown during the test, so expectation does not steer your answers.
Why does the hearing range shrink with age?
High tones are picked up by hair cells at the base of the cochlea, which tend to wear out first with age and noise. This age-related hearing loss (presbycusis) usually begins at the highest frequencies, often long before speech is affected, and progresses slowly. How fast it goes varies a lot from person to person; loud noise speeds it up.
How your device limits the result
Sound is played at a sample rate of usually 44.1 or 48 kHz, so no tone above about 22 or 24 kHz can be produced. Small phone and laptop speakers reproduce low tones weakly, and many headphones lose level at very high frequencies. Some wireless connections compress the sound and may drop the highest tones. That is why a lower result on one device does not necessarily mean your hearing has changed.
What this test does not measure
A clinical hearing test (audiogram) measures the quietest level you can hear at standard frequencies, usually from 250 Hz to 8 kHz, with calibrated equipment in a quiet room. This page only finds the frequency range you can hear at one uncalibrated volume. Use it out of curiosity or as a reason to get checked, not as a diagnosis.